Skip to main content

Simulation not reset

Platform: Process Simulate

This prompt appears both during export and during import of Resolver results, whenever Process Simulate is either still playing or the playhead is not at the start. Resolver needs the cell at the initial pose before it can safely export or import motion.

Dialog shown in Resolver​

Simulation reset required. Move to start?

What you can do in this dialog​

  • Can you continue? Depends on your choice
  • Buttons in the popup: Yes, No
  • What happens next: Yes rewinds the simulation to the start and continues the export or import. No cancels the export or import so you can reset the cell yourself.
  • Next step: See impact if you continue

Impact if you continue​

Yes stops playback, returns the simulation to the start, then continues the export or import. No leaves the study unchanged and does not apply the export or import until you move to start and run the operation again.

How to fix it​

  1. Choose Yes when you are satisfied that letting Resolver rewind Process Simulate to the start is acceptable for this export or import.
  2. Choose No when you must keep the current pose for inspection—then use Process Simulate’s simulation controls to go to start yourself and restart the export or import from Resolver.