Skip to main content

Project opened in Line Simulation Mode

Error ID: 1104
Platform: Process Simulate

Triggered when the study is opened in Line Simulation Mode / MPS

What this error means​

  • Severity: Error
  • Blocking behaviour: blocks_export
  • Dialog type: Error - Export is blocked (Abort)
  • The message indicates that Resolver found an issue with the current Process Simulate setup and is warning you before continuing with the export/import workflow.

Dialog text shown in Resolver​

Suggested text from Matt: Resolver export is only supported in Standard Mode. 
We have detected you are currently in Line Sim mode.
Please re-open the study in Standard Mode before exporting.

How to fix it (step-by-step)​

  1. Carefully read the dialog text shown above and note any robots, operations, objects, or settings that are mentioned.
  2. In Process Simulate, inspect the affected station or operation and verify that the setup matches the expectations described in the message (for example: targets, robots, kinematics, collision sets, RCS configuration, export options, cloud settings, etc.).
  3. This error blocks the export. Adjust the Process Simulate model or Resolver settings so that the problematic condition no longer applies.
  4. Save your changes in Process Simulate and run the Resolver import/export again.
  5. Confirm that the message no longer appears, or that it now reflects the updated configuration correctly.