Skip to main content

Unreachable location

Error ID: 1101
Platform: Process Simulate

This sanity check verifies that all operation locations are reachable by their assigned robots. A location is unreachable if it's outside the robot's workspace or violates joint limits. The export cannot proceed until all locations are made reachable or removed from the operations.

What this error means​

  • Severity: Error
  • Blocking behaviour: blocks_export
  • Dialog type: Error - Export is blocked (Abort)
  • The message indicates that Resolver found an issue with the current Process Simulate setup and is warning you before continuing with the export/import workflow.

Dialog text shown in Resolver​

Robot: {robotName}
Operation: {operationName}
Location: {locationName},

Out-of-reach location

How to fix it (step-by-step)​

  1. Carefully read the dialog text shown above and note any robots, operations, objects, or settings that are mentioned.
  2. In Process Simulate, inspect the affected station or operation and verify that the setup matches the expectations described in the message (for example: targets, robots, kinematics, collision sets, RCS configuration, export options, cloud settings, etc.).
  3. This error blocks the export. Adjust the Process Simulate model or Resolver settings so that the problematic condition no longer applies.
  4. Save your changes in Process Simulate and run the Resolver import/export again.
  5. Confirm that the message no longer appears, or that it now reflects the updated configuration correctly.